EMC Qlogic QLA22xx Guia de Instalação descarregar pdf (Página 65)

Configuring a CLARiiON Boot Device

3-29

Configuring an EMC Boot Device

options, depending on whether you want to disrupt the connectivity

of the host:

◆ Without disrupting Host Connectivity (more complex procedure

using Navisphere CLI):

Note: You must have Navisphere CLI installed. Refer to product notes for

complete usage instructions.

RR:1.Using a command prompt, browse to the Navisphere CLI

directory (typically

C:\Program Files\EMC\Navisphere

CLI>

6. Enter command navicli -h

<sp_IP>

storagegroup

-connecthost -host <

hostname

> -gname

where

<sp_IP>

is the IP address of either array SP;

is the hostname of the host connection to update;

and

is the name of the storage group of

the host connection to update.

7. When prompted, verify the

and

are correct as follows:

Connect host

to storage group

<storagegroupname

> (y/n)?"

Enter Y to proceed.

8. Perform a device rescan on your host, and verify the

additional device paths are present.

◆ With brief disruption of Host Connectivity (simpler procedure

using Navisphere GUI):

RR:1.Shut down the host.

9. Remove the host from the storage group.

10. Apply the change.

11. Add the host back into the storage group.

12. Restart the host.

13. Check the array connectivity status to ensure all connections

you require are active.

QLogic_Windows.book Page 29 Friday, May 27, 2005 3:53 PM

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 105 106

Comentários a estes Manuais

Sem comentários

EMC Qlogic QLA22xx Guia de Instalação Página 65

Comentários a estes Manuais

Manuais e produtos relacionados com Redes EMC Qlogic QLA22xx