EMC Qlogic QLA22xx Guia de Instalação descarregar pdf (Página 76)

4-2

EMC Fibre Channel with QLogic HBAs in the Windows Environment

Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)

Installing the HBA Driver

To use EMC storage array disks with a Windows host, you need an

EMC-qualified HBA driver. The HBA kit includes an EMC-approved

driver, which must be installed and configured prior to partitioning

the storage array disks. You should also check the QLogic website for

the latest EMC-approved version. To ease installation of the driver,

unzip the driver file onto a blank diskette or temporary folder on the

hard disk.

Driver Revision History

Driver support is as follows:

◆ STORPort 2.1.0.0 and SCSIPort 2.1.0.0 – QLA23XX, Windows 2003

(SCSI and STOR) and Windows 2000 (SCSI only)

◆ STORPort 2.1.0.8 and SCSIPort 2.1.0.3 – QLA23XX, Windows 2003

(STOR only) and Windows 2000 (SCSI only)

Windows 2003 STORport Updates

ATTENTION: EMC recommends that users planning to upgrade to Service

Pack 1 for Windows 2003 should upgrade their HBA drivers to the latest

supported version prior to installing the service pack.

Installation Procedure for Windows 2000 and Windows 2003 Hosts

Currently, the shipping version of Windows 2003 requires post-RTM

hotfixes to resolve some known issues. For all Windows 2003 STOR-

Port installations, you should obtain the current Microsoft QFE hotfix

listed in the EMC Support Matrix with the HBA driver revisions.

Install this hotfix before installing the HBA driver.

To install the driver into a Windows 2000 or Windows 2003 host, fol-

low these steps:

1. Boot the host with Windows 2000 or Windows 2003.

2. From the Windows taskbar, select Start, Programs,

Administrative Tools, Computer Management.

3. In the left pane of the Computer Management dialog, click the

Device Manager icon.

QLogic_Windows.book Page 2 Friday, May 27, 2005 3:53 PM

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 105 106

Sem comentários

EMC Qlogic QLA22xx Guia de Instalação Página 76